Home6 Completely Different Types Of Wall Tiles
6 Completely Different Types Of Wall Tiles

6 Completely Different Types Of Wall Tiles

Ceramic tiles are just thin items of clay, often with a color or tấm ốp tường giả gỗ pattern on the face, covered with a glaze and fired to supply a surface that is extraordinarily hard-wearing, waterproof and stain-resistant. The surface may be clean or textured.

Tiles come in squares, generally 4-1/4in (108mm) or 6in (152mm) square, oblongs and a small range of interlocking shapes. Some tiles are sold in metric sizes - 100mm, 150mm and 200mm, for example.

Initially, ceramic tiles had unglazed square edges, and special border tiles with one or two rounded edges had to be used to complete off on the edges of tiled areas. Now, sq.-edged tiles are often glazed on all 4 sides, or some tiles in a box have one or glazed edges. "Common' tiles have angled edges in order that there isn't any want for spacers - the correct measurement of hole is left for grouting.

Two sorts of plastic spacer are available for use with square-edged tiles which have no spacer lugs. Both are cruciform in form and are tilted into the junction between four tiles (or two on a border); one type is eliminated once the adhesive has set; the other is smaller and left in place. An alternative is to use match slicks positioned between adjacent tiles.

For finishing off the sides of areas of ceramic tiling, you can get a plastic trim, a part of which suits beneath the edge of the last tile. For internal corners (next to a bath, say), matching quadrant tiles can be utilized, and there's a special trim for sealing the gap between tiles and a kitchen worktop. Flexible silicon sealants will also be used for both these jobs.

Particular-function ceramic tiles are also available warmth-resistant tiles for around fireplaces and subsequent to boilers and frost-resistant tiles for unheated outside WCs, for example.

Fixing tiles is comparatively easy, although it may be time-consuming. They should be caught to the wall with a special ceramic tile adhesive, and the gaps between the tiles needs to be filled in with hard-setting waterproof compound called grout.

A tiled surface is a cold one, and so in humid rooms it might undergo from condensation.

Cork tiles are made by slicing up pressed layers of the bark of a cork tree to supply thin panels. Most are 300mm sq. and about 3mm thick, but oblong panels are additionally available.

The surface of cork tiles is warm to the touch, however unless it is scaled (cork ground tiles, for instance) it marks simply and is not simply cleaned. Tiles might be caught to the wall with cork tile adhesive or contact adhesive, which makes them relatively simple to fix however virtually inconceivable to remove later.

Metallic tiles are made from thin metal sheets and have hollow backs. They can be fixed to the wall with double-sided self-adhesive pads or with an adhesive. Most metallic tiles can be minimize to shape with scissors though tin snips could also be required for the harder ones. Metallic tiles can be bent to shape. The tiles are often coloured gold, silver or copper and may have a matt or semi-gloss finish. In addition, the metallic effect may be overprinted with a sample or a person design. Sizes are 108mm, 150mm or 300mm square. The sturdiness of metallic tiles varies from model to model - some are affected by steam. Most are damaged by abrasive cleaners.

Mirror tiles are small squares of silvered glass, normally 152mm or 230mm square. Most are clear glass, but there is a choice of silver, bronze or smoke-grey finish. They are usually used for decorating the backs of alcoves and comparable small areas, and are fixed to the wall with small double-sided self-adhesive pads. Unless the surface to which they are fixed is completely flat and true, a distorted reflection is produced from the surface of the tiles.